Highlights:

• Validate your ASIC from foundry from your simulator
• Validate your FPGA from any vendor (XILINX,ALTERA,ACTEL,etc) from your simulator
• Compare your ASIC/FPGA with behavioral or RTL code
• Replace your expensive Software Simulation MODEL or bus functional models directly with the off the shelf available digital IC's or STANDARD PARTS or available ASIC if the IC is a CMOS STATIC CORE
• Target your design towards XILINX or ALTERA for emulation
• MAP your black box in VHDL or VERILOG to the VRAP UCB board
• Multi chip Emulation on to same or different target technology using more than one VRAP UCB
• Compare your design with "Standard Part" available in the market, if the standard part is a CMOS STATIC CORE
• Integrate your design with multi chip or multi targeted FPGA/ASIC technology
• Boon for hardware and software core IP developers and users
• Save your simulation time by plugging FLASH/SRAM/SDRAM (up to 2GB) emulator
• Gate level Simulation Acceleration
• Application Board Validation using right adaptors (option)

Features:

• Supports ASIC with pin count maximum 299 pins
• Supports all major FPGA from major FPGA vendors
• Maximum of 299 I/O’s
• Compilation is more than 1000 times faster
• Simulation is more than 1000 times faster
• Can mix behavioral code and VRAP UCB board in the same design
• Can compare between behavioral simulation and VRAP UCB
• Cascadable up to 8 systems without HUB
• Unlimited Expansion using HUB
• Comes with VRAP PCI interface card from VDesign
• Works with PC/Windows and Sun Sparc Workstation( Solaris )

Description:

The VRAP UCB is a real specialty product. The one of its kind available for HDL design engineers to validate their ASIC or FPGA using the same stimulus. The VRAP UCB board can receive any other chip that could be integrated in any VHDL or Verilog design. The VRAP UCB unit comes with its own proprietary PCI interface card for 32 bit 33MHz slot on Intel or Sun Sparc platform.

To make things clearer and crisper, the VRAP UCB board, the second member of the VRAP family boards is used for VHDL/Verilog simulation acceleration at the gate level and FPGA/ASIC or Board Validation

Download Application Notes:

Models Available: ( Maximum 3 Power Supply Supported )

• Model-E (5V,3.3V,2.5V)
• Model-XL (3.3V,3.3V,2.5V)